MYK Arment Waterproofing Systems

Product Details:

It is an acrylic polymer, used as a cement modifier when applied provides good bond with masonry / cement and thus improves the tensile and flexural strength properties of the mortar.

Product Details:

AquaArm TG is a Cementitious, polymer dispersion based flexible protective coating and waterproof barrier. This product is two-component and resistant to water, moisture and abrasion. Its liquid mixing component is solvent free. AquaArm TG is a stand-alone product. It can be top or over coated with flexible or rigid mortars, stuccos or coatings for uniform appearance.

Product Details:

Single component water based acrylic waterproof coating. It can be applied to most structural surfaces to make them waterproof. The coating is UV stable and highly reflective with high flexibility

Product Details:

ReArm SBR 45 is a modified Styrene butadiene Rubber emulsion specially designed for use as a bonding agent. It is suitable as an admixture for obtaining waterproof concrete, plasters and mortars it is also suitable for preparation of repair mortars. Damaged and spalled concrete. Repair of large cracks.

Product Details:

AquaArm 1K is a rigid hardening, cement based waterproofing material. AquaArm 1K is made of quartz sand, Portland cement and additives. It does not contain any materials, which may cause any negative effects on reinforcement or concrete. AquaArm 1K hardens to a rigid impervious layer. If subsequent cracking of the surface is possible, use AquaArm 2C.

Product Details:

AquaArm Coat WAC is a single component water based acrylic waterproof coating. It can be applied to most structural surfaces to make them waterproof. The coating is UV stable and highly flexible.

Product Details:

AquaArm WPU 1K is a single-component, liquid applied, elastomeric polyurethane coating for waterproofing concrete surfaces. AquaArm WPU 1K provides excellent resistance to moisture, water, and salts penetration into concrete and masonry surfaces.

Product Details:

AquaArm SBS 3000X is a SBS modified self adhesive bitumen membrane with a cross laminated HDPE film which has a high chemical, puncture resistance. The self adhesive side is protected with a silicon coated release film. Factory made selvedge is provided on one side of the membrane to give a bitumen to bitumen contact on overlaps, thus restricting any water penetration through the lap joints. The cross laminated HDPE film is provided to enhance the puncture resistance of the membrane and has excellent physical and application properties. AquaArm SBS 3000X is a bituminous membrane obtained by the hot lamination of a modified bitumen compound with a cross laminated high-density polyethylene film (HDPE). The result is a waterproofing products that offers superior performance as demanded by today's advanced building technology.

Product Details:

FloArm Cempo2 is a three part; epoxy modified layers of 2 to 3 mm. A. As a Temporary Moisture Barrier (TMB) (min. 2 mm thick) under Epoxy, Polyurethane and PMMA resin floors, over high moisture content substrates, even green concrete. It can also be layed on dry concrete. B. As a self-smoothing screed for:  Leveling or patching horizontal concrete surfaces, in new work or repairs, particularly in aggressive industrial environments.  Floor topping on non-ventilated damp substrates without particular aesthetic requirements.  Leveling layer under Epoxy, Polyurethane and PMMA floor coatings / screeds, tiles, sheet floors, carpets or wooden floors.  Repair and maintenance of monolithic and vacuum concrete floors. C. Extended with quartz sand, as a patching and repair mortar Under Epoxy, Polyurethane and PMMA floor coatings/screeds. Designed for use on cementitious substrates (See Notes on Application/Limitations

Product Details:

AquaArm IC is a state-of the art one component, penetrating crystalline material for waterproofing and protecting new or old structurally sound concrete. It resists strong hydrostatic pressure. AquaArm IC is powered by advanced crystalline technology which chemically reacts with moisture and free lime to reduce the water absorption of the resultant cement matrix within the concrete. This is a result of the formation of nano-scale crystals by the active catalysts present in the capillary system. This sustains a durable waterproof effect in the concrete, thereby blocking the passage of water. This reaction will continue to take place anytime water is present for the life of the concrete structure where by making the AquaArm IC a truly permanent and integral waterproofing solution. The AquaArm IC nano-crystals will also grow in and along static hairline crack sealing them and preventing further incoming water.

Product Details:

Bostik No More Nails is a multi purpose construction adhesive. It is a general-purpose adhesive suitable for interior or exterior general construction work. Being highly water resistant, styrene safe with high initial grab. It is a very versatile product. No More Nails is a gunnable synthetic rubber based adhesive which exhibits excellent green strength, flexibility, good temperature resistance and good slump resistance.