Call : +919822263733, +917020050427, +917447875540
MYK laticrete 335 Multipurpose

MYK laticrete 335 Multipurpose

890 Onwards INR/Bag

Product Details:

  • Usage Construction
  • Purity 98-99 %
  • Color Grey and White
  • Physical State Powder
  • Supply Ability : 150-200 Bag Per Month
  • Click to view more

Price And Quantity

  • 890 Onwards INR/Bag
  • 1 Bag

Product Specifications

  • Construction
  • Grey and White
  • 98-99 %
  • Powder

Trade Information

  • Cheque, Cash in Advance (CID), Cash Advance (CA)
  • 150-200 Bag Per Month
  • 5 Days
  • 20 & 50 kg bags
  • Maharashtra
  • IS 15477 Type: 2 EN: C2ETS1

Product Description


Multipurpose highly polymer-modified thin-set adhesive for fixing large format tiles and stone on the interior and exterior floor & wall.


  • Single component, just add water
  • High strength, polymer-modified
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a C2TES1 classification.
  • Exceeds IS 15477 “ Type 2 Adhesive standards.
  • Water and shock-resistant


  • Concrete& Concrete Masonry
  • MIVON Concrete, VDF, Tremix Concrete
  • Cement Mortar Beds
  • Cement Plaster
  • Ceramic tile, Vitrified Tile, and Natural Stone
  • Glass mosaic tile
  • Brick Masonry
  • Cement Backer Board
  • Cement Terrazzo
  • Calcium Silicate Board
  • Gypsum Wallboard
  • *Consult the backer board manufacturer's datasheet for the specific recommendations and load-bearing capacity of specific board intended for use.


Designed especially for interior and exterior floor and wall installations of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, precast terrazzo, engineered stones and natural stones over concrete and on a variety of substrates. Good underwater shear bond allows this product to be used for wet areas like swimming pools, sauna, water bodies, and washrooms. Can be used for tile on tile applications and also as a slurry bond adhesive in wet on wet applications


  • Place clean, potable water into a clean mixing bowl. Add LATICRETE 335 powder into the mixing bowl. Use approximately 5.5 - 6L of water for 20 kg of powder.
  • Mix by hand or with a slow speed mixer to a smooth, trowel able consistency. Allow adhesive to slake for 5-10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel.
  • Note: Addition of MYK LATICRETE latex admix, partially or completely replacing water would enhance the bond strength, flexibility of the thin-set mortar.
  • Contact MYK LATICRETE technical services for large format tile or stone installations on exterior surfaces.


  • Approx 55-60 sq.ft. per 20kg bag with 1/4 x 1/4 (6mm x 6mm) square notched trowel for average bed of 3mm.
  • Coverage will vary depending on trowel notch size, type and size of tile and substrate smoothness and evenness.


* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.

Back to top
C M C CORPORATION All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.