Our product range includes a wide range of dr. fixit repellin wr for exterior brick & stone masonry surfaces, dr. fixit rust remover liquid for cleaning re-bars & steel surfaces and dr. fixit zinc rich primer for cathodic protection to re-bars & steel surfaces.
Dr. Fixit Repellin WR For Exterior Brick & Stone Masonry Surfaces
18 months from the date of manufacturing in unopened condition.
Store in a cool & dry place.
On porous substrate 5-6 sq. meter / litre / coat & on low porous substrate 7-8 sq. mt / litre / coat
Clear Free Flowing liquid
Form Of Chemical
Dr. Fixit Repellin WR is composed of Siloxane & Silane polymers dispersed in high boiling point solvent. It is used as water repellent of concrete & cementitious vertical walls of building because it penetrate deeply into the substrate & provides an effective water repellent protective coating. It does not change the appearance of the substrate & is UV resistant.
Typical Applications: Water repellent treatment for-
Clay brick surfaces
Natural and artificial stones
Ease of application - Ready to use, brushable or spray applied.
Staining - Clear coating does not stain the treated surface.
Appearance - Does not change the appearance of exterior decorative coating
Economical - Cost effective.
Penetration - Due to low viscosity penetration is high, which provides the hydrophobic zone.
Yes! I am Interested
Dr. Fixit Rust Remover Liquid for Cleaning Re-Bars & Steel Surfaces
24 months from date of manufacturing in unopened condition.
Dr. Fixit Rust Remover is based on chloride free chemical & additive solution in water. It is used as rust remover which effectively cleans rust from steel surfaces, before application of any protective coating.
On re-bars during repairs to reinforced concrete structures.
Maintenance of mild steel structures like tanks, water pipelines, shuttering plates and other corroded steel surfaces.
Yes! I am Interested
Dr. Fixit Zinc Rich Primer for Cathodic Protection to Re-Bars & Steel Surfaces
Coverage rate will be 6 mt.sq. per litre at DFT of 100 microns in 2 coats
Dr. Fixit Epoxy Zinc Primer is a two-component system based on metallic Zinc and Epoxy resin, hardener & additives which on mixing gives a grey coloured liquid. Dr. Fixit Epoxy Zinc Primer is recommended for coating on steel reinforcement or steel surfaces as an anti corrosion primer. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations.